The other vehicle clipped you and sped off before you could note the number. Without evidence, a hit-and-run usually goes nowhere. With dashcam footage that captured the plate, you can walk into a police station with a case that's ready to file. The catch: what you do in the first few minutes decides whether that footage is usable. Here's the exact sequence to preserve your clip and turn it into an FIR fast.
First 5 minutes: protect the footage before it's overwritten
Dashcams record on a loop — old clips are automatically overwritten by new ones. Your number-one priority is stopping that from happening.
- Lock or save the clip immediately. Most dashcams have a manual lock button, or the built-in G-sensor may have auto-locked the impact clip. If yours saved it automatically after the jolt, confirm it's in the protected/locked folder.
- Better still, stop recording by removing the memory card once you're safely stopped, so nothing can overwrite the file. Keep the card safe.
- Back it up to your phone as soon as possible — most dashcams pair over Wi-Fi to an app, or you can copy the file via a card reader. Now you have two copies.
- Do not edit, trim or filter the file. Original, untouched footage carries far more weight. Editing it can raise doubts about authenticity.
A 2-channel setup like the Sense 4K Max captures both the front approach and, if the vehicle fled behind you, the rear — so check both channels for the clearest view of the plate.
Next: capture the supporting details
While it's fresh, record everything around the incident:
- Note the exact date, time and location — your dashcam usually stamps these on the footage; confirm they're correct and legible.
- Photograph the damage to your vehicle and the scene from a few angles with your phone.
- Look for witnesses and note anything they saw; get a contact if they're willing.
- Check for nearby CCTV — shops, toll booths, traffic cameras — and note their location so police can request that footage too.
Filing the FIR: the practical steps
You can now go and register a First Information Report.
- Go to the police station with jurisdiction over where the incident happened — that's the location of the accident, not where you live. If unsure, any station can guide you or register a "zero FIR" and transfer it.
- Carry: your ID, driving licence, vehicle RC, insurance papers, the memory card and/or a copy of the footage, and the photos.
- Give a clear, factual statement of what happened, in sequence, with the date, time and location. State plainly that you have dashcam footage showing the other vehicle and its number plate.
- Provide the footage as evidence. Ask that it be noted in the FIR that video evidence has been submitted, and get an acknowledgement.
- Get a copy of the FIR with its number. You're entitled to it, and you'll need it for insurance.
- Many states also allow online FIR/e-complaint filing for such cases via the state police portal — useful to start the process, though you may still need to visit to submit the footage.
Having the plate on video is what makes this quick: instead of an untraceable "unknown vehicle" complaint, the police have an identifiable vehicle to act on.
After the FIR: insurance and follow-up
- Inform your insurer immediately and give them the FIR copy and the footage. For a hit-and-run where you claim your own-damage cover, the FIR is usually essential.
- Note the investigating officer's name and contact, and follow up politely on progress.
- Keep your backups safe until the matter is fully closed — don't format that card.
Why the dashcam changes the outcome
A hit-and-run without evidence is, realistically, hard for anyone to pursue. The same incident with clear footage of the fleeing vehicle's number plate becomes a straightforward, actionable case — for the police and for your insurance claim. That's the entire value of the camera in this moment: it converts "someone hit me and drove off" into "this vehicle hit me and drove off, and here's the proof." Preserve the clip, keep the file original, and file promptly.
This is general guidance, not legal advice. Procedures and timelines can vary by state and change over time — follow the instructions of the police and your insurer for your specific case.
What if the number plate isn't perfectly clear?
Sometimes the plate is partly obscured — mud, glare, a fast getaway, or night conditions. Don't assume the footage is useless. Even a partial plate, combined with the vehicle's make, model, colour and any distinctive marks (a dent, a sticker, a damaged bumper), gives the police something to work with, especially when cross-referenced with nearby CCTV or toll-camera records. Note down everything you remember while it's fresh, and hand over the footage as-is — investigators can often enhance or piece together details you can't. This is also a reminder of why good camera placement and monsoon settings matter: they're what make the plate readable in the first place.
Act fast — why timing matters
The window right after a hit-and-run is when evidence is most recoverable. Nearby CCTV and shop cameras also loop and overwrite, often within days, so the sooner the police can request that footage, the better. Your own dashcam card can be overwritten too if you keep driving without saving the clip. And memories of witnesses fade. Filing promptly — ideally the same day — means the trail is still warm for everyone involved. Practically: save and back up your clip first, then file the FIR, then inform your insurer, in that order, and don't let it slide to "next week."
Keep your evidence chain simple and clean
Once you've filed, resist the urge to share the footage widely, edit it, or post it online before the process is done — an untouched original in the hands of the police and your insurer is worth more than a viral clip. Keep your backup safe, note the FIR number and the investigating officer's contact, and follow up politely. A calm, orderly approach — original footage, prompt FIR, insurer informed — is what turns a distressing hit-and-run into a case that actually moves forward.