Products

Dylect® Pressure Washer Genuine Spare Part – Pump Cover (Located in Pump Head – Protective End Cover Section) | ADC12 Aluminium Die-Cast | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Pump Cylinder Assembly (Located in Pump Head – Plunger Pressure Chamber) | ADC12 Aluminium Die-Cast | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Screw Set for Body (Chassis Assembly Fasteners) | Steel | Compatible Only with Flow Prime Model (Pack of 2)

Dylect® Pressure Washer Genuine Spare Part – Screw Set for Handle (Mounting Fastener Set) | Steel | Compatible Only with Flow Prime Model (Pack of 6)

Dylect® Pressure Washer Genuine Spare Part – Seal Bracket (Located in Pump Head – Water Seal Retainer Position) | PA66 30% Glass-Filled Nylon | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Self-Tapping Screw ST5.5×20 (For Plastic Covers & Brackets) | Carbon Steel | Structural/Chassis Fastener | Compatible Only with Flow Prime Model (Pack of 4)

Dylect® Pressure Washer Genuine Spare Part – Spring (Valve) (Located in Relief/Unloader Valve – Pressure Setting Mechanism) | SUS304 Stainless Steel | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – U-Pin (Retaining) 10×19×2 (Located in Pump Assembly – Retainer/Hinge Position) | 1CR18NI9TI Ti-Stabilized Stainless Steel | Compatible Only with Flow Prime Model (Pack of 2)

Dylect® Pressure Washer Genuine Spare Part – U-Pin (Retaining) 12.4×20×1.8 (Located in Pump Assembly – Retainer/Hinge Position) | 65MN Spring Steel | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – U-Pin (Retaining) 12×26×2.5 (Located in Pump Assembly – Retainer/Hinge Position) | 65MN High-Carbon Spring Steel | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Valve Body (Overflow) (Located in Pump Head – Unloader/Bypass Housing) | PA66 30% Glass-Filled Nylon | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Valve Core (Relief) (Located in Pump Head – Pressure Relief Mechanism) | POM Engineering Plastic | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Valve Plug (Overflow) (Located in Overflow Valve – End Cap & Seal Retainer) | POM Engineering Plastic | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Water Seal 10×16×4 (Located in Pump Head – High-Pressure Water Seal Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Hex Socket Head Cap Screw M6x55 (Allen Bolt) – Pump & Motor Mounting Fastener

Dylect® Pressure Washer O-Ring 12x2 mm (95HS Buna-N) | Motor Shaft & Pump Head Seal | Compatible with Clean Plus, Flow Plus, Clean Pro, Power Max, Force Pro