Products

Dylect® Pressure Washer Genuine Spare Part – O-Ring 12×2 (Located in Pump Head – Sealing Interface Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 4.5×1.8 (Located in Pump Head – Small Passage Seal) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 5.5×2 (Located in Pump Head – Small Port Seal Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 58×2 (Large Diameter Housing Seal for Pump Head Assembly) | NBR Buna-N Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 6×2 (Located in Pump Head – Small Port/Fitting Seal) | NBR Buna-N Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 7.5×1.2 (Located in Pump Head – Small Port/Fitting Seal) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Oil Seal 10×16×4 (Located in Pump Head – Plunger Seal Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Outlet Check Valve Assembly (Located in Pump Head – One-Way Discharge Section) | POM Engineering Plastic | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Outlet Pipe Assembly (Located in Pump Outlet – High-Pressure Discharge Path) | Nylon 6,6 + 30% Glass Fiber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Peach Ring (Located in Pump Body – Internal Retainer/Seal Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Plunger (Located in Pump Head – Reciprocating Piston Section) | 65MN High-Carbon Steel | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Plunger Plate (Located in Pump Reciprocation System – Movement Transfer Section) | 4CR13 Martensitic Stainless Steel | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Power Knob (Front Panel Rotary Control) | Polypropylene | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Pressure Plate (Outlet) (Located in Pump Head – Outlet Pressure Support Section) | ADC12 Aluminium Die-Cast | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Pump Assembly with Micro Switch (Pre-Built Pump Module with TSS Control) | Aluminium + PP Multi-Material | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Pump Body (Located in Main Pump Housing – Structural Manifold Section) | ADC12 Aluminium Die-Cast | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Pump Cover (Located in Pump Head – Protective End Cover Section) | ADC12 Aluminium Die-Cast | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Pump Cylinder Assembly (Located in Pump Head – Plunger Pressure Chamber) | ADC12 Aluminium Die-Cast | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Screw Set for Body (Chassis Assembly Fasteners) | Steel | Compatible Only with Flow Prime Model (Pack of 2)

Dylect® Pressure Washer Genuine Spare Part – Screw Set for Handle (Mounting Fastener Set) | Steel | Compatible Only with Flow Prime Model (Pack of 6)

Dylect® Pressure Washer Genuine Spare Part – Seal Bracket (Located in Pump Head – Water Seal Retainer Position) | PA66 30% Glass-Filled Nylon | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Self-Tapping Screw ST5.5×20 (For Plastic Covers & Brackets) | Carbon Steel | Structural/Chassis Fastener | Compatible Only with Flow Prime Model (Pack of 4)

Dylect® Pressure Washer Genuine Spare Part – Spring (Valve) (Located in Relief/Unloader Valve – Pressure Setting Mechanism) | SUS304 Stainless Steel | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – U-Pin (Retaining) 10×19×2 (Located in Pump Assembly – Retainer/Hinge Position) | 1CR18NI9TI Ti-Stabilized Stainless Steel | Compatible Only with Flow Prime Model (Pack of 2)

Dylect® Pressure Washer Genuine Spare Part – U-Pin (Retaining) 12.4×20×1.8 (Located in Pump Assembly – Retainer/Hinge Position) | 65MN Spring Steel | Compatible Only with Flow Prime Model (Pack of 1)