Products

Dylect® Pressure Washer Genuine Spare Part – Gasket 2 mm (Relief) (Located in Relief Valve – Flat Seal Position) | POM Engineering Plastic | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Hex Socket Cap Screw M5×20 (Combo) (Fastener for Pump & Frame Sub-Assembly) | High-Strength Carbon Steel | Compatible Only with Flow Prime Model (Pack of 4)

Dylect® Pressure Washer Genuine Spare Part – Hex Socket Cap Screw M6×55 (Long Structural Fastener) | Carbon Steel | Chassis/Structural Assembly | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Hose Release Switch (Quick-Connect for Pump Outlet) | Polypropylene | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Inlet Check Valve Assembly (Located in Pump Head – One-Way Water Intake Section) | POM Engineering Plastic | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Inlet Pipe Assembly (Located at Pump Inlet – Water Suction Path) | PA66 + 30% Glass Fiber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Micro Switch Assembly (TSS Trigger – Motor Start/Stop Control) | PA66 + 30% Glass Fiber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 10×2 (Located in Pump Head – Port/Fitting Seal) | NBR Buna-N Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 12.5×2.65 (Located in Pump Head – Static Seal Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 12×2 (Located in Pump Head – Sealing Interface Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 4.5×1.8 (Located in Pump Head – Small Passage Seal) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 5.5×2 (Located in Pump Head – Small Port Seal Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 58×2 (Large Diameter Housing Seal for Pump Head Assembly) | NBR Buna-N Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 6×2 (Located in Pump Head – Small Port/Fitting Seal) | NBR Buna-N Rubber | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – O-Ring 7.5×1.2 (Located in Pump Head – Small Port/Fitting Seal) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Genuine Spare Part – Oil Seal 10×16×4 (Located in Pump Head – Plunger Seal Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 3)