Products

Dylect® Pressure Washer Genuine Spare Part – U-Pin (Retaining) 10×19×2 (Located in Pump Assembly – Retainer/Hinge Position) | 1CR18NI9TI Ti-Stabilized Stainless Steel | Compatible Only with Flow Prime Model (Pack of 2)

Dylect® Pressure Washer Genuine Spare Part – U-Pin (Retaining) 12.4×20×1.8 (Located in Pump Assembly – Retainer/Hinge Position) | 65MN Spring Steel | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – U-Pin (Retaining) 12×26×2.5 (Located in Pump Assembly – Retainer/Hinge Position) | 65MN High-Carbon Spring Steel | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Valve Body (Overflow) (Located in Pump Head – Unloader/Bypass Housing) | PA66 30% Glass-Filled Nylon | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Valve Core (Relief) (Located in Pump Head – Pressure Relief Mechanism) | POM Engineering Plastic | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Valve Plug (Overflow) (Located in Overflow Valve – End Cap & Seal Retainer) | POM Engineering Plastic | Compatible Only with Flow Prime Model (Pack of 1)

Dylect® Pressure Washer Genuine Spare Part – Water Seal 10×16×4 (Located in Pump Head – High-Pressure Water Seal Position) | NBR Rubber | Compatible Only with Flow Prime Model (Pack of 3)

Dylect® Pressure Washer Hex Socket Head Cap Screw M6x55 (Allen Bolt) – Pump & Motor Mounting Fastener

Dylect® Pressure Washer O-Ring 12x2 mm (95HS Buna-N) | Motor Shaft & Pump Head Seal | Compatible with Clean Plus, Flow Plus, Clean Pro, Power Max, Force Pro

Dylect® Pressure Washer O-Ring 4.5×1.8 mm (80HS Nitrile Rubber Seal) – Internal Pump Seal for All Models

Dylect® Pressure Washer O-Ring 5.5x2 (80HS, RoHS) – High-Pressure Pump Sealing Ring

Dylect® Pressure Washer O-Ring 58×2 mm (70HS, RoHS) Pump Housing Seal Ring for Clean Plus, Flow Plus, Clean Pro, Power Max & Force Pro

Dylect® Pressure Washer O-Ring 9.5×1.8mm (80HS Nitrile Rubber Seal) for Clean Plus, Flow Plus, Clean Pro, Power Max & Force Pro

Dylect® Pressure Washer Outlet Check Valve Assembly for Clean Plus, Flow Plus, Clean Pro & Power Max (High-Pressure Flow Control Valve)

Dylect® Pressure Washer Peach Ring (Motor Drive Ring) 73×2.1 mm | Nitrile Rubber Retaining/Spacer Ring | Compatible with All Dylect® Models

Dylect® Pressure Washer Plunger Assembly Kit (Reciprocating Plunger Set) – φ21.4×51 mm, Steel Construction, Compatible with Clean Plus, Flow Plus, Clean Pro & Ultra Force