DYLECT NutriMax Cold Press Juicer

Q1. How do I assemble the juicer before first use?
Insert the mesh filter and auger into the juicing assembly, lock it properly, attach it to the main unit, and rotate the feeding chute until it locks securely.

Q2. How do I start the juicer?
Plug into a 230V socket, add ingredients through the flip cover, and turn the knob to ON.

Q3. How do I stop the juicer?
Turn the knob to OFF and wait until the auger stops completely.

Q4. When should I use the Reverse (REV) function?
Use it when ingredients are stuck or pulp isn’t flowing properly.

Q5. How should I prepare ingredients?
Wash thoroughly, cut into smaller pieces, remove seeds and thick peels, and avoid very fibrous or hard items.

Q6. Can I add ingredients during operation?
Yes, through the small hole in the flip cover without stopping the machine.

Q7. What is the juice outlet tap used for?
It controls juice flow—open it to release juice and close it to prevent dripping.

Q8. What is the maximum running time?
Up to 20 minutes continuously, followed by a 30-minute cooling period.

Q9. How do I disassemble the juicer after use?
Switch OFF, unplug, remove cups and chute, then take out the auger and filter using the locking ring.

Q1. Why is the juicer not starting?
Check power connection, socket, and proper assembly. If the issue persists, contact support.

Q2. Why did the juicer stop suddenly?
It may be due to overload or overheating. Reduce load, allow cooling, and restart.

Q3. What should I do if ingredients get stuck?
Use REV mode briefly. If needed, remove and cut ingredients smaller before retrying.

Q4. Why is pulp not coming out properly?
The outlet or filter may be blocked. Clean both and use REV mode if needed.

Q5. Is noise during operation normal?
Yes, slight crushing sound is normal. Excess noise may indicate improper assembly or hard ingredients.

Q6. Why is there a smell during first use?
A mild smell is normal initially and will fade after a few uses.

Q7. Why is juice yield low?
Use fresh ingredients and ensure the filter is clean.

Q8. Why is there excess pulp in juice?
Clean the mesh filter and pulp outlet thoroughly before reuse.

Q1. What should I do after every use?
Disassemble, rinse all parts immediately, clean the filter, and dry before reassembling.

Q2. Can I wash the motor base with water?
No. Wipe it with a damp cloth only.

Q3. How do I clean the mesh filter?
Use the provided cleaning brush under running water.

Q4. How often should I inspect the juicer?
Before every use for damage or residue buildup.

Q5. How should I store the juicer?
Keep it clean, dry, and stored in a cool place.

Q6. How can I ensure long motor life?
Follow usage limits, avoid overloading, and clean regularly.

Q1. Can I use ice cubes?
No. Ice can damage internal components.

Q2. Can I juice very hard or dry ingredients?
No. These may damage the auger and motor.

Q3. Do I need to remove seeds and peels?
Yes, especially hard seeds and thick peels.

Q4. Can I reprocess pulp?
No. It may block the pulp outlet.

Q5. Why should juice be consumed immediately?
Fresh juice oxidizes quickly and loses nutrients.

Q6. Can I insert hands or other objects?
No. Always use the push rod.

Q7. Can I operate it continuously for long periods?
No. Limit usage to 20 minutes at a time.

Q8. Can I disassemble while it’s running?
No. Always switch OFF and unplug first.

Q9. Can children use the juicer?
No. It should only be used under adult supervision